Thermal design of advanced electronics packaging;
Design, simulation and fabrication of Micro heat sink, MEMS sensors and actuators.

2005-2009 Ph.D, Microelectronics & Solidstate electronics, ShangHai Jiaotong University
2002-2005, M.S, Fluid Machinery&Engineering, HeFei University of Technology
1998-2002, Vacuum Science&Technology, HeFei University of Technology

2005-present Shanghai Jiao Tong University (SJTU)
Co-advisor to 2 master-candidates
Co-advisor to 2 doctor-candidates

2013-present Study on mems-based high current pulsed power switch, Project leader, (National Key Laboratory of Science and Technology on Nano/Micro Fabrication Foundation)
2012-present Thermal Analysis for 3D ICs, Project leader, (Sub project of National Program on Key Basic Research Project (973 Program))
2010-2012 Micro-patterning of Bonded magnets. Project leader, (National Key Laboratory of Science and Technology on Nano/Micro Fabrication Foundation)
2009-2012 CrCuCr electrod for PDP cell, Project leader, (Program of changhong electric co., ltd )
2009-2012 CNT assistant AC-PDP (Program of changhong electric co., ltd )
2011-present Non-silicon Fabrication (Program of Science and Technology Commission of Shanghai Municipality)
2011-present The MEMS inertial switch (Key Project of Chinese Ministry of Education)

2009, Outstanding graduates in Shanghai, SJTU

[1]. Yan Wang, Guifu Ding. Numerical analysis of heat transfer in a manifold microchannel heat sink with high efficient copper heat spreader, Microsystem Technologies, 2008, (14): 389-395. (SCI、EI)
[2]. Yan Wang, Guifu Ding. Experimental investigation of heat transfer performance for a novel microchannel heat sink, Journal of Micromechanics and Microengineering, 2008, (18): 035021. (SCI、EI)
[3]. Yan Wang, Guifu Ding, Shi Fu. Highly efficient manifold microchannel heatsink, Electronics Letters, 2007, 43(18): 978-980. (SCI、EI)
[4]. Yan Wang, Guifu Ding. A microchannel heat sink with unitary circular flow and short distance heat transfer mode: design and analysis, Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems, 2007: 747-750.
[5]. Yan Wang，Sun shujing，Ding guifu，Wang hong , Electrochemical degradation characteristics of refractory organic pollutants in coking wastewater on multiwall Carbon Nanotubes modified Electrode, Journal of Nanomaterials, 1D Nanomaterials，2012
[6]. Yan Wang, WenGuo Chen, Zhuoqing Yang, Guifu Ding, Hong Wang, Xiaolin Zhao，an inertial micro-switch with cantilever fixed electrode for prolonging contact time, Proc. IEEE MEMS2013。
[7]. Min Deng, Guifu Ding, Yan Wang*, Xuemei Cui, Hong Wang, Faheng Zang, Huiqing Wu, Room temperature mass production of carbon nanotube field emission micro-cathode arrays using electroplating of a CNT/Ni composite followed by micro-machining,Vaccum，85 (2011) 827e832.
[8]. Wenjing Lu, Guifu Ding, Yan Wang*, Min Deng, Zhenwei Zhou. Nanomanufacturing of multi-walled carbon nanotubes enhanced electrochemical electrode through surface micromachining, International Journal of Nanomanufacturing, 2011, 7(2): 104-115. (EI)
[9]. Yang Yuan, Liting Wang, Yan Wang*, Xuemei Cui, Hong Wang and Guifu Ding, " Electrochemical Reaction of Riboflavin at Carbon-nanotubesNi Composite Modified Electrode (CNCME) Fabricated by Composite Electro-deposition of Carbon-nanotubes and Ni Matrix", Journal of Nanoengineering and Nanosystems, J Nanoengineering and Nanosystems, 226(2) 81–85, 2012
[10]. Qifa Liu, Guifu Ding, Zhuoqing Yang, Bin Zhu and Yan Wang*. “Development of an AC Plasma Display Panel with Low Discharge Voltage Utilizing Electrophoretic Carbon Nanotube as Field Emission Layer” J. Micromech. Microeng, Vol.22, No.7, pp.075014, 2012
[11]. Qifa Liu, Yan Wang, Hong Wang, Guifu Ding. Aluminum electrode and alumina layer for plasma display panel, IMID/IDMC/Asia Display Conference, Seoul, KOREA, 2010: 538-539.
[12]. Qifa Liu, Yan Wang, Zhuoqing Yang, Haiquan Ding, Chang Liu, and Guifu Ding. “Electrophoretic Deposition of Carbon Nanotubes Auxiliary Layer for Power Saving in AC Plasma Display Panels” IEEE Transactions on Plasma Science, Vol.40, No.4, pp.1110-1116, 2012
[13]. Min Deng, Guifu Ding, Yan Wang, Huiqing Wu, Yuanjin Yao, Lida Zhu. Fabrication of Ni-matrix carbon nanotube field emitters using composite electroplating and micromachining, Carbon, 2009, 47(15): 3466-3471.
[14]. Min Deng, Guifu Ding, Yan Wang, Hong Wang, Shi Fu. MEMS-based carbon nanotube and carbon nanofiber Cu micro special electric contact, Journal of Micromechanics and Microengineering, 2009, (19): 065001.
[15]. Min Deng, Wenjing Lu, Yan Wang, Faheng Zang, Guifu Ding. Mass production of triode-type carbon nanotube field emission micro-cathode arrays using composite electroplating and micromachining at room temperature, 5rd Int. Conf. on Nano/Micro Engineered and Molecular Systems, IEEE NEMS, Xiamen, CHINA, 2010: 191-194. (EI)
[16]. Wenjing Lu, Guifu Ding, Yan Wang, Min Deng, Zhenwei Zhou. Fabrication and electrochemical characterization of multi-walled carbon nanotubes film on a titanium mesh electrode, IET International Conference on Advanced Technology of Design and Manufacture, Beijing(会议优秀论文),, CHINA, 2010: 431-435.

Applied Chinese Patents

[1]. Guifu Ding, JinYuan Yao, Yan Wang, Min Deng, Lida Zhu, Fabrication for CNTs or CNF field emitter cathode. CN 200810200043.9.
[2]. Guifu Ding, Wenjing, Lu, Yan Wang, Min Deng, Zhenwei Zhou, Fabrication Method of Multi-channel CNT sensors. CN 201010214415.0.
[3]. Zhuoqing Yang, Kai Tao, Guifu Ding, Yan Wang, “Broadband electromagnetic micro-vibration energy harvester”, CN201010199502.3